Steel Products We Supply in the UAE

Everything Seen Steel supplies in the UAE, in one place. Each product below links to a page with the full size range, weights per metre, grades and standards, so you can check a section before you ask for a price. Deliveries go to all seven emirates, and mill test certificates are issued with the material.

Mild steel hollow sections

Square, rectangular and round sections to EN 10219, EN 10210, ASTM A500 and JIS G3466, in S235, S275, S355 and SS400. These are the workhorse sections for frames, trusses, racking, fencing and shop fabrication. Full collection: mild steel hollow sections.

Mild steel square hollow section tubes (SHS), 20 x 20 mm up to 400 x 400 mm
Mild steel rectangular hollow section tubes (RHS), 40 x 20 mm up to 400 x 200 mm
Mild steel circular hollow section pipes (CHS), half inch up to 12 inch, Schedule 40 and EN 10255 medium

Galvanized hollow sections and pipe

Hot dip galvanized to EN ISO 1461, which coats the welds, the cut ends and the inside faces of the section. This is the right specification for anything outdoors in the UAE, and non negotiable on coastal sites. Full collection: galvanized iron hollow sections.

Beams and columns

Hot rolled structural sections in the European, British, American and Japanese profiles. The four systems are not interchangeable, so check which one the drawing calls for before ordering. Our guide to steel beam sizes compared sets them side by side. Full collection: beams and columns.

European beams, IPE, HEA and HEB to EN 10365 in S275 and S355
Universal beams, the British UB profile to BS 4-1
American wide flange beams, W shapes to ASTM A992 and A572 Gr 50
JIS wide flange shapes, Japanese H beams to JIS G3192 in SS400

Channels

U and C channels in three systems. The quickest way to tell them apart is the flange: UPN tapers on the inside, PFC is flat. Full collection: C channels.

UPN channels, UPN 80 to UPN 400 to DIN 1026
PFC parallel flange channels, 100 x 50 to 430 x 100 to BS 4-1
JIS channels, 75 x 40 to 380 x 100 to JIS G3192

Angles, round bar and flat bar

General fabrication sections for bracing, frames, cleats, gates, fencing and anchor work. Collections: mild steel angles and mild steel round and flat bar.

Mild steel equal angles, 20 x 20 x 3 up to 200 x 200 x 20
Mild steel unequal angles, 40 x 25 up to 200 x 100
Mild steel round bar, 6 mm up to 100 mm diameter
Mild steel flat bar, 20 x 3 up to 200 x 20

Sheet, plate and coil

Flat products from thin gauge coil through to structural plate, cut to size where you need it. Collections: mild steel sheet, plates and coils and galvanized iron sheet and coils.

Hot rolled coil, 1.2 mm to 12 mm in standard and custom widths
Hot rolled sheets, cut from coil to your sheet size
Hot rolled plates, 6 mm to 100 mm in S275, S355 and A36
Mild steel chequered sheets, 3 mm to 12 mm for floors, ramps and stair treads
GI coil, pre galvanized coil in Z120 to Z275 zinc classes
GI sheet, galvanized sheet 0.3 mm to 2.0 mm in Z120 to Z275, cut to size

Grating

Walkway panels, platform grating and trench covers, hot dip galvanized after fabrication so every cut edge and weld is coated. Load classes and panel weights are in our GI grating guide. Full collection: GI grating.

Galvanized iron gratings, bearing bars from 25 x 3 to 50 x 5 at 30 or 40 mm pitch

Reference guides

Written for people specifying steel in the UAE, with the numbers in metric and the standards named.

steel weight chart, kg per metre and kg per square metre for every section we supply
steel grades guide, how S275, S355, A36 and SS400 compare
GI coating classes explained, Z120 through Z275 and what they mean for life to first maintenance
GI sheet and coil gauge chart, gauge to millimetres and weight per square metre
GI grating sizes and load classes, A15 through F900 and panel weights
Steel beam sizes compared, IPE, HEA, UB, W shapes and JIS H beams

Grades and standards we work to

Structural: EN 10025-2 S235JR, S275JR and S355JR, ASTM A36, A992 and A572 Gr 50, JIS G3101 SS400 and G3106 SM490
Hollow sections: EN 10219, EN 10210, ASTM A500 and JIS G3466
Pipe: EN 10255, BS 1387, ASTM A53 and A106
Galvanizing: EN ISO 1461 for hot dip, EN 10346 Z120 to Z350 for pre galvanized coil

Getting a price

Send your list through the steel quote request form or on WhatsApp at +971 56 227 5722. Sections, grades, lengths, quantities and the delivery location are all we need. Deliveries run to all seven emirates, and you can also reach us through the contact page.

Delivery across the UAE

We deliver to every emirate. Each page below covers the industrial areas we reach, what tends to move there and how orders are handled locally.