Steel Supplier in Ajman
Seen Steel supplies structural sections, hot rolled flat products, hollow sections and galvanized material to workshops and contractors in Ajman. Ajman runs on small and mid size fabrication, so the things that matter here are a straight rate, material cut to your list, and a truck that turns up when it was promised.
What we supply into Ajman
- Beams and columns, including universal beams, parallel flange channels, IPE and HEA sections and JIS wide flange
- C channels in UPN, JIS and PFC profiles
- Mild steel angles, equal and unequal, for cleats, bracing and secondary steel
- Round bar and flat bar for fabrication and connections
- Mild steel hollow sections in square, rectangular and circular profiles
- Hot dip galvanized hollow sections for external and coastal structures
- Sheet, plate and coil, including hot rolled plate and chequered plate cut to size
- GI sheet and coil for roofing, cladding and ducting
- GI grating for walkways, platforms and trench covers
Where we deliver in Ajman
- Ajman Industrial Area 1 and Industrial Area 2
- Al Jurf Industrial 1, 2 and 3
- Ajman Free Zone and the Ajman Port plots
- New Industrial Area on the Emirates Road side
- Al Jurf residential and commercial developments
- Manama and Masfout, inland from the coast
Ajman sits between Sharjah and Umm Al Quwain on the same coastal run, so a delivery here is usually part of a northern emirates route rather than a dedicated trip. That works in your favour on freight if your date has any flexibility in it. If the date is fixed, say so and it gets planned as its own load.
Who we supply in Ajman
- Metal fabrication workshops in Al Jurf and the Industrial Areas
- Gate, railing, shutter and canopy makers
- Shed, warehouse and labour accommodation builders
- Furniture and equipment manufacturers using tube, angle and sheet
- MEP subcontractors needing supports, brackets and duct material
- Building contractors working on mid rise residential projects
How we work
- You send a list with sizes, grades and quantities. We come back with a rate and a delivery date.
- Cut to length is available on most sections, so you are not buying full lengths and cutting off waste.
- Mill test certificates are supplied with the material.
- Galvanized material is specified properly for coastal exposure rather than sold as one generic coating.
- If something in your list is not the right call for the application, we say so before you order, not after.
Getting a price
Send your requirement through the steel quote request form, or message the list straight to WhatsApp on +971 56 227 5722. Include sizes, grades, quantities and the delivery point in Ajman and we can price it without a round of questions first.
Frequently asked questions
Do you deliver to Ajman Industrial Area and Al Jurf?
Yes, both are regular delivery points on the northern emirates route.
Is there a minimum order for Ajman?
We supply against confirmed requirements rather than from a fixed price list. Smaller lots are easier to place when they can ride with a load already going north, so tell us your date and we will tell you honestly whether it works.
Do you deliver to Ajman Free Zone?
Yes. Free zone deliveries need a gate pass arranged by the receiving company, so give us the consignee name exactly as it is registered with the zone.
Can you cut to length before delivery?
Yes, on most sections and on plate. Send your cutting list with the enquiry and we price the cut material rather than the full lengths.
Do you supply mill test certificates?
Yes, MTCs are issued with the material.
Do you supply galvanized material?
Yes, including hot dip galvanized hollow sections, GI sheet and coil, and GI grating. Ajman is coastal, so for anything outdoors it is worth specifying the coating properly rather than taking whatever is cheapest.