Steel Supplier in Abu Dhabi

Seen Steel supplies structural steel, hot rolled flat products, galvanized products and hollow sections to fabricators, contractors and workshops across Abu Dhabi. Material is cut to your list, delivered to your yard, and comes with mill test certificates and a delivery date confirmed in writing alongside the quotation.

What we supply into Abu Dhabi

• Beams and columns, including universal beams, parallel flange channels, IPE and HEA sections and JIS wide flange
• C channels in UPN, JIS and PFC profiles
• Mild steel angles, equal and unequal, for cleats, bracing and secondary steel
• Round bar and flat bar for fabrication and connections
• Mild steel hollow sections in square, rectangular and circular profiles
• Hot dip galvanized hollow sections for external and coastal structures
• Sheet, plate and coil, including hot rolled plate and chequered plate cut to size
• GI sheet and coil for roofing, cladding and ducting
• GI grating for walkways, platforms and trench covers

Where we deliver in Abu Dhabi

Most of the steel we send into the emirate goes to Mussafah and to the industrial zones along the Abu Dhabi to Dubai corridor, not to the island.

• Mussafah Industrial Area, including the M sectors and ICAD I, II, III and IV
• KIZAD and the Khalifa Port industrial plots
• Abu Dhabi Airport Business City and the Al Falah side
• Mohamed Bin Zayed City and Shabhat workshops
• Baniyas and Al Markaz
• Al Ain Industrial City and Sanaiya
• Al Dhafra region, including Ruwais, Madinat Zayed and Ghayathi
• Island projects on Yas, Saadiyat and Al Reem, where site access is booked in advance

Mussafah and ICAD are the routine runs and are scheduled as normal deliveries. Al Ain and the Al Dhafra region are long hauls, so those loads are worth consolidating into a single full truck rather than splitting an order across two trips. Tell us the delivery point when you send the enquiry and the freight is priced properly the first time instead of being revised after you have already accepted the rate.

Who we supply in Abu Dhabi

• Structural steel fabricators in ICAD and Mussafah working on warehouses, plant structures and pipe racks
• Oil and gas subcontractors and vendors working to client approved specifications
• MEP and HVAC contractors needing GI sheet, angle and hollow section for supports and ducting
• Precast and concrete yards needing plate, flat bar and mesh support steel
• Marine and jetty contractors on the coastal and port projects
• Maintenance workshops and general fabrication shops buying in smaller repeat lots

Documentation and specification

Work in Abu Dhabi more often than not comes with a documentation requirement attached, particularly on energy sector and government contracts. Mill test certificates are issued with the material as standard. If your client needs a specific grade, a specific standard, a named mill, or third party inspection before dispatch, tell us at enquiry stage rather than after the order. Sourcing to a specification is straightforward when it is known up front and expensive when it is discovered at delivery.

How we work

• You send a list with sizes, grades and quantities. We come back with a rate and a delivery date.
• Cut to length is available on most sections, so you are not buying full lengths and cutting off waste.
• Mill test certificates are supplied with the material.
• Galvanized material is specified properly for coastal exposure rather than sold as one generic coating.
• If something in your list is not the right call for the application, we say so before you order, not after.

Getting a price

Send your requirement through the steel quote request form, or message the list straight to WhatsApp on +971 56 227 5722. Include sizes, grades, quantities and the delivery point in Abu Dhabi and we can price it without a round of questions first.

Frequently asked questions

Do you deliver to Mussafah and ICAD?
Yes. Mussafah and ICAD I to IV are among our regular delivery points and are handled as scheduled runs rather than as special trips.

Do you deliver to Ruwais and the Al Dhafra region?
Yes. It is a long haul, so freight is quoted against the actual load. Full truck loads to Ruwais, Madinat Zayed and Ghayathi price far better per tonne than part loads, so it is worth consolidating your requirement where the programme allows it.

Can you supply to a client approved specification?
Yes, provided we know the specification when we quote. Send the grade, the standard and any mill or inspection requirement with your enquiry.

Do you supply mill test certificates?
Yes, MTCs are issued with the material.

Can you cut to length before delivery?
Yes, on most sections and on plate. Send your cutting list with the enquiry and we price the cut material rather than the full lengths.

What is the smallest order you will take?
We supply against confirmed requirements rather than from a fixed price list, so send your list and we will tell you straight away whether it works as a load.

Do you supply galvanized material for coastal and offshore work?
Yes. For anything near the water or on a marine structure, hot dip galvanized sections and a heavier zinc coating on coil are worth the extra, and we will advise on the right specification.