Steel Supplier in Ras Al Khaimah
Seen Steel FZ LLC is registered in Ras Al Khaimah, at Compass Building, Al Shohada Road, Al Hamra Industrial Zone FZ. Ras Al Khaimah is our own emirate, and it is a different market from the rest of the country: quarrying, cement, ceramics and marine work rather than tower cranes. We supply structural sections, plate, hollow sections and galvanized material into all of it.
What we supply into Ras Al Khaimah
- Beams and columns, including universal beams, parallel flange channels, IPE and HEA sections and JIS wide flange
- C channels in UPN, JIS and PFC profiles
- Mild steel angles, equal and unequal, for cleats, bracing and secondary steel
- Round bar and flat bar for fabrication and connections
- Mild steel hollow sections in square, rectangular and circular profiles
- Hot dip galvanized hollow sections for external and coastal structures
- Sheet, plate and coil, including hot rolled plate and chequered plate cut to size
- GI sheet and coil for roofing, cladding and ducting
- GI grating for walkways, platforms and trench covers
Where we deliver in Ras Al Khaimah
- Al Hamra Industrial Zone and the RAKEZ industrial plots
- Al Ghail Industrial Zone and Al Ghail Free Zone
- Al Jazeera Al Hamra and RAK Maritime City
- Khor Khwair and the Al Jazirah quarry and cement belt
- Al Nakheel, Al Dhait and the city workshops
- Digdaga, Al Rams and Sha am on the northern coast road
- Al Hamra and Mina Al Arab development sites
Because the licence sits here, RAK deliveries are not treated as an outlying run. Khor Khwair and Sha am are the long legs within the emirate, and quarry sites in particular need the vehicle type agreed in advance because internal haul roads are not always trailer friendly.
Who we supply in Ras Al Khaimah
- Quarry and crusher operators needing chequered plate, hot rolled plate, structural sections for screening plants and conveyor framing
- Cement and aggregate plants on maintenance and shutdown work
- Ceramics, glass and manufacturing plants in Al Hamra and Al Ghail
- Marine and jetty contractors working out of RAK Maritime City and the ports
- Steel fabrication workshops taking cut to length structural orders
- Hotel, resort and residential contractors at Al Hamra, Mina Al Arab and Al Marjan
Plate and wear material
Quarry and cement work eats plate faster than any other sector in the country. Chequered plate for platforms and access, hot rolled plate for chutes, hoppers, liners and repair work, and heavier sections for plant structures are the repeat items here. Tell us the thickness, the plate size and whether you want it cut to a pattern, and it arrives ready to weld rather than ready to be cut again.
How we work
- You send a list with sizes, grades and quantities. We come back with a rate and a delivery date.
- Cut to length is available on most sections, so you are not buying full lengths and cutting off waste.
- Mill test certificates are supplied with the material.
- Galvanized material is specified properly for coastal exposure rather than sold as one generic coating.
- If something in your list is not the right call for the application, we say so before you order, not after.
Getting a price
Send your requirement through the steel quote request form, or message the list straight to WhatsApp on +971 56 227 5722. Include sizes, grades, quantities and the delivery point in Ras Al Khaimah and we can price it without a round of questions first.
Frequently asked questions
Are you based in Ras Al Khaimah?
Yes. Seen Steel FZ LLC is licensed in RAKEZ at Compass Building, Al Shohada Road, Al Hamra Industrial Zone FZ, Ras Al Khaimah.
Do you deliver to the quarries at Khor Khwair?
Yes. Quarry deliveries are agreed on vehicle type and access before dispatch, because haul roads and weighbridge routing vary from site to site.
Can you supply chequered plate cut to size?
Yes. Send the thickness, the pattern size and your cutting list and we price the cut plate rather than the full sheets.
Do you deliver to Al Hamra Industrial Zone and Al Ghail?
Yes, both are regular delivery points.
Do you supply mill test certificates?
Yes, MTCs are issued with the material.
What is the smallest order you will take?
We supply against confirmed requirements rather than from a fixed price list, so send your list and we will tell you straight away whether it works as a load.
Do you supply galvanized material for marine work?
Yes. For jetty, quayside and anything within reach of spray, hot dip galvanized sections and a heavier zinc coating on coil are worth the extra, and we will advise on the right specification.